FRANCE ARABIC PATCH WHITE ON MB 3.5" X 2" REJECT#354 W/VELCRO® BRAND FASTENER

Description

FRANCE ARABIC INFRARED PATCH WHITE ON MAGIC BLACK 3.5" X 2" REJECT#354 WITH VELCRO® BRAND FASTENER
.50 EACH WITH  First Class Mail shipping, additional patches ship free.
THIS PATCH IS A REJECT.
THESE PATCHES ARE NOT PERFECT BY ANY MEANS. SOME OF THESE PATCHES WILL HAVE SMALL BLACK DOTS ON THEM.  PATCHES MAY HAVE LARGE DIRT PARTICLES, STREAKS IN THE COLORS, BLURBS IN PRINTED IMAGE, OR A COMBINATION OF THESE DEFECTS.
PATCHES WILL BE IDENTIFIABLE, FUNCTIONAL AND REFLECTIVE BUT NOT IN PERFECT CONDITION.
ONE IMPORTANT THING TO KNOW IS THAT THESE REJECTS HAVE A BRITTLE/NON DURABLE TOP COAT AND CANNOT BE HANDLED ROUGHLY
.
Raw Solas areas or Magic Black areas will reflect brightly when viewed with night vision. Patches labeled as Reflective (raw solas) are non covert and will reflect under any condition.
We do not recommend these patches for use in the field, they are only for collecting.  Please purchase SolasX patches for use in the field.
Many of these patches are uncommon patches, printed for individual units or branches of the military.  Many patches have only a limited quantity available for purchase.  Most of the REJECT patches are older patches.  The patches labeled as “Old Tan” and “Gloss Finish” were printed before 2007.  Patches that have a Matt finish were printed after 2007 that was before we switched over to the SolasX printing process.  These patches must not be bent or the topcoat will crack.
These are the same type of patches used by the
US
Military. The patches were manufactured in our factory here in the
USA
.  Every step of the process is done here at Anytime Sign, artwork, screen printing, and die cutting.
We use the best quality materials and printing techniques:
3M
®
Brand Solas is approved by the U.S. Coast Guard as a retro reflective material used to enhance visibility of life saving equipment in nighttime, or low light conditions.  3M
®
brand Solas reflects brightly when viewed with night vision equipment, providing crystal-clear friend or foe identification.
The VELCRO® BRAND FASTENER we use has the highest quality acrylic-based adhesive glue and is able to withstand extremely hot climates. HOOK SIDE ON BACK OF PATCH ONLY, WE DO NOT PROVIDE THE
LOOP
SIDE.  VELCRO® BRAND FASTENER 330 PSA 0172.
Solvent Based Inks.  All the inks we use on our patches are Solvent Based.  Solvent based inks are better than digitally printed or UV inks because they adhere better and have a thicker ink deposit.  Solvent based inks will not fade, even if they are left outdoors for years.
Magic Black Infrared Ink.  Magic Black is made and developed by Anytime Sign.  We regulate the quality and the thickness for ultimate opacity in the visible spectrum.  In the infrared spectrum, Magic Black becomes transparent allowing for the 3M
®
Brand solas to reflect light back to the Night Vision equipment, providing crystal- clear friend or foe identification.
VELCRO® is a registered trademark of Velcro BVBA, used with permission.