For Jeep Wrangler JL JK 2007-2019 Hard Top Rubber Seal Wind,Noise Reduction Kit

Description

Home
Payment
Shipping
About us
Contact us
Details
Description
Advantages:
Dustproof,waterproof and noise reduction.Solving the problem of rain, dust and noise entering the roof repeatedly, which perfectly solves your worries.
Easy installation:
PURE ALCOHOL TOWEL:clean required area.ADHESION PROMOTER:1.affix the surface clean,no water,no oil;2.wipe the surface clean wait few seconds;3.paste the tape then press it for few seconds.SO EASY!
Material and package:
environmental rubber,high elasticity,high and low temperature resistance.The package includes one 59.05inch (1.5 m) long sealing strip (longer than the roof groove, giving you more operating space).
Fitment:
2007-2019 jeep wrangler JK JL.
Noted:
After installation, take care to cut from the gap in the middle of the roof to facilitate the removal of the subsequent roof.3M glue position is placed close to the front part of the car,as shown in picture,be careful not to stick the reverse.
Do you find there is a gap in your car roof?
When you want to dismantle your car door,you will notice there are much dust stuff in the gap.
Now you will not worry about it.
Our sealing strip is your good partner.
Protect car roof from rainwater,dust and noise.you will not feel trouble about them permeating in your car repeatedly
Improvements：
Since some customers talk about the tape of the seal strip,we have advanced it.Now we have Pure Alcohol Towel and Adhesion Promoter for buyers,that help you use the seal strip better.
How to use Adhesion Promoter:
Tear open the bag take out the wipe paper,wipe the surface clean,wait a few seconds.Then paste the tape and squeeze.
Directions:
1:Scrub the area with a clean rag or alcohol towels we provide.
This is very important,if not your tape is non-stick.But if you waste the tape when step 2,you can cut it off.Our sealing strip is longer than the true length.
2:Take out the sealing strip and tear off a little tape.
3:Fixed the position and press it firmly along the seal strip until it is finished.then cut off the excess.
5:Cut along the gap in the middle of the roof to facilitate the removal of the roof.
6:The installation result is as pictures shown.
Payment Method
Shipping Policy
Returns Policy
About us
Contact us
Payment
Delivery Details
Returns Policy
[RETURN_POLICE]
About US
Contact US
Home
Payment
Shipping
About us
Contact us