A/C Compressor & Clutch for 02-05 2004 Jeep Liberty V6 3.7L 55037466AE/CS20144

Description

listing template
VISIT OUR STORE
SIGH UP FOR EMAIL
A/C Compressor & Clutch for 02-05 2004 Jeep Liberty V6 3.7L 55037466AE/CS20144
Item Condition
? A/C compressor is to meet or exceed specifications.
? All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes.
? New bearing, new seals and gaskets, new coil, lathed clutch assembly.
? Tested for noise, vibration, durability, vacuum decay, and pressure decay to ensure no leaks.
Fitment
2005 Jeep Liberty
2004 Jeep Liberty
2003 Jeep Liberty
2002 Jeep Liberty
R
eference
Manufacturer Part Number:
CO 4335C
Interchange Part Number:
55037466, 55037466AE
Other Part Number:
98576, 6511261
Installation Method
Step One:
Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.
Step Tow:
Flush the condenser and evaporator using
NON-OIL BASED
A/C flush. On expansion valve systems
THE VALVE MUST BE REMOVED
before the evaporator can be flushed.
FLUSHED CONDENSERS FROM OUTLET TO INLET AND     EVAPORATORS FROM INLE T TO OUTLET.
WARNING:
NEWER STYLE CONDENSER DESIGNS ARE VERY HARD, AND SOMETIME IT WOULD BE IMPOSSIBLE TO DO FLUSH, IN THOSE CASES IT IS SUGGESTED THAT IF THE COMPRESSOR HAS A MAJOR FAILURE THE CONDENSER SHOULD BE REPLACED.
Step There:
Drain all the oil from the new compressor and dispose of according to local, state and federal laws.NOTE:if you compressor has a drain plug you will need to open it up and drain what oil is in there too
Step Four:
Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
Step Five:
Install new receiver drier or accumulator and new orifice tube or expansion valve.
Step Six:
Evacuate the A/C system for a minimum of one hour.
Step Seven:
After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
Step Eight:
Start engine whit A/C controls on MAX AIR with door and windows open.
Step Nine:
Add the remaining charge of refrigerant as called for by the manufacture.
Package Included
1  A/C Compressor
Automobile Air Compressor Installation Instruction
I. The function of air compressor is to compress air, not to cool air. A product that has no signs of leakage, abnormal sound and has sufficient pressure can be certificated as a qualified product.
II. If the original automobile compressor is broken, it indicates the original automobile air conditioning system has already failed.
The causes of the failure can be summarized as follows
:
(1) Poor heat dissipation and too much fluoride will cause impressively high pressure, overwhelming the capacity of the compressor and causing components of the connection rod broken or burning lock;
Because of too long vehicle service, the compressor is aging seriously and produces organic carbide ,which will impede water from being drained out by making the pipes blocked or the deliquefaction jar invalid, resulted in  pipeline ice blockage;
(3)The installed pipe assembly isn't fixed properly, resulted in air leakage.
III. The following steps shall be followed before the replacement of the compressor:
(1) Clean all pipes of the air conditioning system individually, inject cleaning agent into the condenser and evaporator and soak them for about 20 minutes. Pour out the cleaning agent and dirt with high-pressure nitrogen. The deliquefaction jar, fluid collector and throttle shall not be cleaned; make sure that no residue of the cleaning agent remains in the system; desiccate the refrigerant circuit, if necessary;
（
2
）
Clean the surface of the condenser and evaporator, check if the cooling fans' speed is normal;
(3) Clean or replace the expansion valve; the deliquefaction jar and pipe filter shall be replaced;
(4) Check and correct oil filling level and oil viscosity before installing the compressor; vacuumize, fill fluorine, check high pressure and low pressure. Usually, the normal ranges of high pressure and low pressure are 180-200Psi and 30-40Psi respectively. If the pressure is abnormal, diagnose and troubleshoot first before installing the compressor;
（
5
）
Check and correct oil filling level and oil viscosity before installing the compressor.
Note: If the original automobile compressor is jammed and shows cylinder scoring, make sure to clean the pipes and replace the heatsink net. Because the specific characteristics of the heat sink net, the above mentioned problems would produce Aluminum scrap, iron powder and residues that cannot be eliminated. Warranty will not be provided in case of the following circumstance: install the compressor without cleaning the pipes and replacing the heatsink net, which would cause cylinder scoring and lock of the newly installed compressor immediately.
You might like this
more>>
Dual Radiator Cooling Fan For Infiniti G35 3.5L 2003 2004 2005
.59
Sport ATV Tires AT 23x7-10 23x7x10 6PR P348 - 10063
.34
Carburetor for 7HP 8HP 9HP Horzontal Engine 390323 394228
.09
Universal Gray & Black Car Seat Cover for Auto Full Set
.99
2 of Sport ATV Tires AT 20x10-9 for Yamaha Raptor
.89
2003-07 Honda Accord Rear Quick Complete Struts & Coil
.29
Shipping Policy
1. Ship worldwide from New Jersey by reliable shipping companies -- USPS, UPS, FEDEX, DHL, etc., and only to VERIFIED PAYPAL ADDRESS. Transport Delivery ETA. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2. International Buyers – Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
b. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
3. Please check your shipping address carefully before checkout, it can't be changed if order completed.
4. Orders placed on weekend will be shipped within 2 days.Notification of shipment with tracking number will be sent to buyers.
5. Standard shipping: 2-7 business days
Expedited Shipping: 2-3 business days
One-day Shipping: 1 business day
International shipping: Varies
6.Ship within 1 business day once payment completed. Notification of shipment with tracking No. will be sent to buyer.
7.We offer discounts for combine shipping. Please contact us first if you need combine shipping, and an invoice with discount will be sent to you.
8.Please allow 5 business days for delivery to US destinations on any eBay orders and 14 business days for delivery to any International destinations. We highly recommend our buyer choose priority/expess mail for international delivery which is much more stable.
Return Policies
1. Refunds given only if item DOA and cannot be replaced via PAYPAL . If so, Please contact us with 5 days since you receive the item and and return to us within 30 days from the delivery date for exchange or refund.
2. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Payment
Payment should be sent within 8(EIGHT) days of auction closing.
Feedback
If you are dissatisfied for any reason, please do not be quick to leave negative/neutral feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you.
Work Time
Work Time:
Monday to Saturday
About Us |
Newsletter|
Feedback|
Contact Us
Copyright © 2021 City-green. All rights reserved.
无标题文档
A/C Compressor & Clutch for 02-05 2004 Jeep Liberty V6 3.7L 55037466AE/CS20144
Item Condition
? A/C compressor is to meet or exceed specifications.
? All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes.
? New bearing, new seals and gaskets, new coil, lathed clutch assembly.
? Tested for noise, vibration, durability, vacuum decay, and pressure decay to ensure no leaks.
Fitment
2005 Jeep Liberty
2004 Jeep Liberty
2003 Jeep Liberty
2002 Jeep Liberty
R
eference
Manufacturer Part Number:
CO 4335C
Interchange Part Number:
55037466, 55037466AE
Other Part Number:
98576, 6511261
Installation Method
Step One:
Remove compressor, receiver drier or accumulator, orifice tube or expansion valve.
Step Tow:
Flush the condenser and evaporator using
NON-OIL BASED
A/C flush. On expansion valve systems
THE VALVE MUST BE REMOVED
before the evaporator can be flushed.
FLUSHED CONDENSERS FROM OUTLET TO INLET AND     EVAPORATORS FROM INLE T TO OUTLET.
WARNING:
NEWER STYLE CONDENSER DESIGNS ARE VERY HARD, AND SOMETIME IT WOULD BE IMPOSSIBLE TO DO FLUSH, IN THOSE CASES IT IS SUGGESTED THAT IF THE COMPRESSOR HAS A MAJOR FAILURE THE CONDENSER SHOULD BE REPLACED.
Step There:
Drain all the oil from the new compressor and dispose of according to local, state and federal laws.NOTE:if you compressor has a drain plug you will need to open it up and drain what oil is in there too
Step Four:
Install half oil charge into the compressor and the remainder throughout the system. Turn compressor shaft 8-10 full revolutions to insure front seal and other internal parts are lubricated.
Step Five:
Install new receiver drier or accumulator and new orifice tube or expansion valve.
Step Six:
Evacuate the A/C system for a minimum of one hour.
Step Seven:
After evacuation install half the refrigerant charge and let the system set for 1 minute. This will allow the refrigerant to pick up oil and spread more evenly throughout the system.
Step Eight:
Start engine whit A/C controls on MAX AIR with door and windows open.
Step Nine:
Add the remaining charge of refrigerant as called for by the manufacture.
Package Included
1  A/C Compressor
Automobile Air Compressor Installation Instruction
I. The function of air compressor is to compress air, not to cool air. A product that has no signs of leakage, abnormal sound and has sufficient pressure can be certificated as a qualified product.
II. If the original automobile compressor is broken, it indicates the original automobile air conditioning system has already failed.
The causes of the failure can be summarized as follows
:
(1) Poor heat dissipation and too much fluoride will cause impressively high pressure, overwhelming the capacity of the compressor and causing components of the connection rod broken or burning lock;
Because of too long vehicle service, the compressor is aging seriously and produces organic carbide ,which will impede water from being drained out by making the pipes blocked or the deliquefaction jar invalid, resulted in  pipeline ice blockage;
(3)The installed pipe assembly isn't fixed properly, resulted in air leakage.
III. The following steps shall be followed before the replacement of the compressor:
(1) Clean all pipes of the air conditioning system individually, inject cleaning agent into the condenser and evaporator and soak them for about 20 minutes. Pour out the cleaning agent and dirt with high-pressure nitrogen. The deliquefaction jar, fluid collector and throttle shall not be cleaned; make sure that no residue of the cleaning agent remains in the system; desiccate the refrigerant circuit, if necessary;
（
2
）
Clean the surface of the condenser and evaporator, check if the cooling fans' speed is normal;
(3) Clean or replace the expansion valve; the deliquefaction jar and pipe filter shall be replaced;
(4) Check and correct oil filling level and oil viscosity before installing the compressor; vacuumize, fill fluorine, check high pressure and low pressure. Usually, the normal ranges of high pressure and low pressure are 180-200Psi and 30-40Psi respectively. If the pressure is abnormal, diagnose and troubleshoot first before installing the compressor;
（
5
）
Check and correct oil filling level and oil viscosity before installing the compressor.
Note: If the original automobile compressor is jammed and shows cylinder scoring, make sure to clean the pipes and replace the heatsink net. Because the specific characteristics of the heat sink net, the above mentioned problems would produce Aluminum scrap, iron powder and residues that cannot be eliminated. Warranty will not be provided in case of the following circumstance: install the compressor without cleaning the pipes and replacing the heatsink net, which would cause cylinder scoring and lock of the newly installed compressor immediately.
Shipping
+
1. Ship worldwide from New Jersey by reliable shipping companies -- USPS, UPS, FEDEX, DHL, etc., and only to VERIFIED PAYPAL ADDRESS. Transport Delivery ETA. Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out. Once your payment is completed, we are not going to accept any more changes to your order.
2. International Buyers – Please Note:
a. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
b. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
3. Please check your shipping address carefully before checkout, it can't be changed if order completed.
4. Orders placed on weekend will be shipped within 2 days.Notification of shipment with tracking number will be sent to buyers.
5. Standard shipping: 2-7 business days
Expedited Shipping: 2-3 business days
One-day Shipping: 1 business day
International shipping: Varies
6.Ship within 1 business day once payment completed. Notification of shipment with tracking No. will be sent to buyer.
7.We offer discounts for combine shipping. Please contact us first if you need combine shipping, and an invoice with discount will be sent to you.
8.Please allow 5 business days for delivery to US destinations on any eBay orders and 14 business days for delivery to any International destinations. We highly recommend our buyer choose priority/expess mail for international delivery which is much more stable.
Payment
+
Payment should be sent within 8(EIGHT) days of auction closing.
Returns
+
1. Refunds given only if item DOA and cannot be replaced via PAYPAL . If so, Please contact us with 5 days since you receive the item and and return to us within 30 days from the delivery date for exchange or refund.
2. If you need return, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
Feedback
+
If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers.
Contact us
+
Work Time:Monday to Saturday
Reply
+
All replies will be sent to your email box, if you don't get response within 24 hours (Sat. & Sun. excluded) please check your eBay My Messages in case that our emails will be filtered automatically by your settings.
Copyright © 2021 citygreen. All rights reserved.